TQC Cross Cut Adhesion Kit CC3000

$0.00

5 in stock

SKU: CSTSP1680 Category: Tags: , ,

Description

The TQC Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.

The cutting depth of the TQC Cross Cut Adhesion Test KIT CC3000 can be adjusted while the cutter is guided by two ball bearings to assure reproducible results. The depth of the TQC Cross Cut Adhesion Test KIT CC3000 is adjustable to measure coatings up to 250 µm thick.

Item Nos: 

CSTSP1680
TQC Cross Cut Adhesion Test CC3000, 6 blades, cutting distance 1 mm, acc. to EN ISO
For use on coatings up to 60 µm on hard substrates.
CSTSP1681
TQC Cross Cut Adhesion Test CC3000, 6 blades, cutting distance 2 mm, acc. to EN ISO
For use on coatings up to 60 µm on soft substrates and coatings from 61 to 120 µm on both hard and soft substrates.
CSTSP1682
TQC Cross Cut Adhesion Test CC3000, 6 blades, cutting distance 3 mm, acc. to EN ISO
For use on coatings from 121 µm to 250 µm on both hard and soft substrates.
CSTSP1683
TQC Cross Cut Adhesion Test CC3000, 11 blades, cutting distance 1 mm, acc. to ASTM
For use on coatings up to 50 µm.
CSTSP1684
TQC Cross Cut Adhesion Test CC3000, 11 blades, cutting distance 1.5 mm, acc. to ASTM
For use on coatings from 50 to 125 µm.

Each TQC Cross Cut Adhesion Test KIT CC3000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.

Click here for:
DATASHEET
MANUAL