TQC Sheen: Cross Cut Adhesion Kit CC2000

$0.00

Cross Cut Adhesion Test Kit CC2000

5 in stock

Description

The TQC CC2000 Cross Cut Adhesion Test KIT is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive
tape for hard substrates.

The cutting knife of the TQC Cross Cut Adhesion Test CC2000 is easy to exchange without the use of extra tools. The self positioning knife bracket of the TQC Cross Cut Adhesion Test CC2000 ensures equal pressure on the cutting knife.

Each TQC Cross Cut Adhesion Test KIT CC2000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.

Click here for:
DATASHEET
MANUAL

We reduced the number of sales options for the cross-cut tester. We eliminated the fixed holder and blade combinations. You can now mix and match as you see fit. This will also help reduce your inventory. The following are the only available option:

Article code Cross cut knives ISO (5×5 pattern) Cross cut knives ASTM (10×10 pattern)
CC1000 kit VF1856  1mm
2mm
3mm
 VF1839
VF1842
VF1844
 1mm
1,5mm
 VF2359
VF1861
CC1000 basic VF1848
CC2000 kit SP1666  1mm
2mm
3mm
 SP1702
SP1703
SP1703
 1mm
1,5mm
 SP1705
SP1706
CC2000 basic SP1665
CC3000 kit SP1714
CC3000 basic SP1695

Knives and tape can be ordered as a spare as well

Item Nos: 

CSTSP1690
TQC Cross Cut Adhesion Test CC2000, 6 blades, cutting distance 1 mm, acc. to EN ISO
For use on coatings up to 60 µm on hard substrates.
CSTSP1691
TQC Cross Cut Adhesion Test CC2000, 6 blades, cutting distance 2 mm, acc. to EN ISO
For use on coatings up to 60 µm on soft substrates and coatings from 61 to 120 µm on both hard and soft substrates.
CSTSP1692
TQC Cross Cut Adhesion Test CC2000, 6 blades, cutting distance 3 mm, acc. to EN ISO
For use on coatings from 121 µm to 250 µm on both hard and soft substrates.
CSTSP1699
TQC Cross Cut Adhesion Test CC2000, 11 blades, cutting distance 1 mm, acc. to ASTM
For use on coatings up to 50 µm.
CSTSP1700
TQC Cross Cut Adhesion Test CC2000, 11 blades, cutting distance 1.5 mm, acc. to ASTM
For use on coatings from 50 to 125 µm.